hickman_logo_600x140.jpg
hickman-building.jpg

Industry Leader for More Than 65 Years.

ANSI / SPRI ES-1 Certified Metal Roof Edging, Parapet Wall Coping, Facia, Commercial Gutters, Gravel Stops, Downspouts, Conductor Heads, Reglets, and Trims.

Category 5 Warranty Guarantees Products to Withstand up to 155 mph Winds with NO Exclusion for Hurricanes!!!

Facia

screen shot 2012-11-02 at 1.19.45 am.png

The low-cost versatile fascia is available in formed galvanized steel and formed or extruded aluminum. Standard face sizes are 5.5”, 7”, 8.5” and 10”. Custom sizes available upon request.

  • Snap-on system that doesn’t require field crimping assuring fast, clean installation.

  • 20-Year Excel Warranty for wind speeds up to 110 mph.

  • Extruded aluminum version available in slightly different profile. Available in 6.25”, 8”, and 10” face sizes.

  • FM Approved for maximum wind rating Class 1-180.

more
screen shot 2012-11-02 at 1.20.05 am.png

This classic product features a two-piece design with a snap- on fascia and rigid termination bar to assure wind and water stay out of the roof system. Standard face sizes are 3.75”, 5.25”, 6.75” and 8.25”. Custom sizes available upon request.

  • Clamps membrane against building perimeter like a termination bar.

  • Allows use of high-torque screws without penetrating top surface of membrane.

  • FM Approved for maximum wind rating Class 1-180 with 20 gauge galvanized steel retainer or Class 1-465 with .050” aluminum retainer.

  • Ballasted version available.

  • Tested, Certified, and Warranted in wind conditions up to 155 mph. 25-Year, Category 5 Warranty.

more
screen shot 2012-11-02 at 1.20.24 am.png

Hickman’s Extruded TerminEdgeTM provides the superior performance of formed TerminEdge with the added benefit of a heavy extruded aluminum retainer that comes in four sizes, 3.75”, 5.25”, 6.75” and 8.25”.

  • Clamps roof membrane against building like a termination bar preventing leaks and blow-offs.

  • Extruded retainer in four sizes: TEX-375 for one nailer, TEX-525 for two nailers, TEX-675 for three nailers and TEX-825 for four nailers of coverage.

  • Covered by our Category 5, 25-Year Warranty in wind conditions up to 155 mph.

  • Ballasted version available.

  • Extension cleat engages under the extruded retainer drip allowing for custom face sizes.

  • FM Approved for maximum wind rating Class 1-135.

more
screen shot 2012-11-02 at 1.20.43 am.png

W.P. Hickman’s Extruded TerminEdge for BUR and modified bitumen roofing has a wide base flange that will secure

BUR and modified roofing plies. Standard extruded retainer bases for face sizes 3.75”, 5.25”, 6.75” and 8.25”.

  • Clamps roof membrane against building like a termination bar preventing leaks and blow-offs

  • Extruded retainer available for face sizes 3.75”, 5.25”, 6.75” and 8.25”.

  • UL Classified to meet the ANSI/ SPRI ES-1 Roof Edge Standard.

  • Covered by our Category 5, 25-Year, 155 mph warranty.

more
screen shot 2012-11-02 at 1.21.02 am.png

Designed with a multi-part technology that prevents shrinking, pull-back and thermal seperation of BUR or Mod Bit roofing plies from the roof’s edge, Hickman’s Safeguard® Gravel Stop has been protecting roofs for over 50 years.

  • Safeguard introduced multiple part technology that solved shrinking, pull-back, and thermal separation from roof edges.

  • Standard face sizes are 6.25”, 7.75”, 9.25” and 10.75”. Custom sizes available upon request.

  • FM Approved for maximum wind rating Class 1-225.

  • Extrusions available in 6.25”, 8” and 10” face sizes.

  • Tested, Certified, and Warranted in wind conditions up to 155 mph. 25-Year, Category 5 Warranty.

more
screen shot 2012-11-02 at 1.21.24 am.png

Safeguard® NP Gravel Stop grips the roofing membrane without the need for exposed fasteners. Standard face sizes are 5.5”, 7”, 8.5” `and 10”. Custom sizes available upon request.

  • Non-penetrating version of our original Safeguard has no exposed fasteners.
  • FM Approved for maximum wind rating Class 1-645.
  • Tested, Certified, and Warranted in wind conditions up to 155 mph, 25-Year, Category 5 Warranty.
more
screen shot 2012-11-02 at 1.21.43 am.png

W.P. Hickman’s MBED® fascia system uses a continuous pattern of offset holes in the flange through which two layers of roofing plies can bond together, sealing the metal flange between them. Edge and membrane become one to create an exceptional seal. MBED features a 20-year, 110 mph warranty.

  • Roofing plies bond together through metal flange to create exceptional seal.

  • Gravel stop style to retain gravel and water or Box style for easy drainage.

  • Standard face sizes for the Box style are 3.5”, 5.0”, 6.5”, and 8.0” and for the Gravel Stop style 4”, 5.5” and 7”. Custom sizes available upon request.

  • FM Approved for maximum wind rating Class 1-90.

more
screen shot 2012-11-02 at 1.22.13 am.png

The fascia and cleat are pre-notched to wrap around the building’s edge without segmenting or kinking.

more
screen shot 2012-11-02 at 1.22.27 am.png

Factory fabricated spillout channel and hold-down bar allows water to spill off roof at strategic locations.

more
screen shot 2012-11-02 at 1.22.34 am.png

Pre-fabricated assembly for downspout water removal. Welded aluminum core-box with fascia cover.

more

Perimeter Blocking

screen shot 2012-11-02 at 1.23.51 am.png

EdgeBox is an innovative new product that is an engineered metal replacement system for wood blocking often necessary at the roof’s edge.

  • Replaces traditional wood blocking or nailers at the perimeter of a low-slope roof.

  • Eliminates concerns about fastener...

more

HICKMAN DIFFERENCE

cat-5-bug.gif

Category 5 Warranty goes up to 155 mph. NO exclusions for Hurricanes!

more
screen shot 2012-11-02 at 2.47.27 am.png

Let Your Imagination Run Wild!!!!

The W.P. Hickman Company is one of the few metal edge manufacturers that specialize in custom design. We take great pride in the craftsmanship and engineering that go into the products we manufacture.

We invented the first roof edge system and innovation and custom capabilities have been a tradition for us since 1945. Hickman products keep wind and water out of the building envelope and our top-notch engineering department allows for creativity with edge system designs. We enjoy creating custom products to not only meet the creative needs of architects across the country, but also exceed building code requirements.

Please view some of the project profiles below for a glimpse of our capabilities, from coping designed to meet hurricane force winds, intricate curves, custom profiles for restoration, to colors matched to customer specified chips, we love a challenge.

more
img_0846.jpg

The International Building Code (IBC) includes the following:

“1505.5 Edge securement for low-slope roofs. Low- slope membrane roof system metal edge securement, except gutters, shall be designed and installed for wind loads in accordance with Chapter 16 and tested for resistance

in accordance with ANSI/SPRI ES-1, except the basic wind speed shall be determined from Figure 1609.”

Designing roof edge systems that meet ANSI/SPRI ES-1 Wind Design Standard is not just a good idea, it’s

now the law. We’ve been designing to that standard for years. In fact, we championed the development of the standard with SPRI, the sheet membrane and component suppliers to the commercial roofing industry trade association.

We embrace this standard because it means a safer, more wind resistant roof edge, which leads to a safer, longer lasting roof. In fact, 59% of low-slope roof failures begin at the roof edge, according to Factory Mutual*. It’s

critical that we design and test our products to protect owner investments, and we promise to continue to meet these...

more

For specification or design assistance, please contact us.