cat-5-bug.gif

WARRANTIES

Category 5 Warranty goes up to 155 mph. NO exclusions for Hurricanes!

screen shot 2012-11-02 at 1.16.08 am.png

Our most popular product, Permasnap coping’s internal gutter system eliminates caulked joints or messy butyl sealants.

  • Snap-on design eliminates exposed fasteners

  • Internal metal chair drainage system eliminates caulked joints.

  • True welded radius, matching corners, end caps, and other accessories are factory fabricated.

  • FM Approved for maximum wind rating Class 1-90.

  • 20-Year Excel Warranty for wind speeds up to 110 mph.

  • Pre-punched holes and supplied stainless steel fasteners for proper attachment and fast installation

Permasnap Plus! with a 16-gauge galvanized steel cleat is FM Approved for maximum wind rating Class 1-180 and has our Category 5, 25-Year, 155 mph Warranty.

more
screen shot 2012-11-02 at 1.16.32 am.png

Permasnap® 2 Coping is specifically engineered to meet the recently developed SPRI/FM 4435/ES-1 Wind Design Standard.

  • The galvanized steel anchor cleat incorporates a 26 gauge stainless steel spring that provides strong uplift performance.

  • Internal metal chair drainage system eliminates caulked joints.

  • True welded radius, matching corners, end caps, and other accessories are factory fabricated.

  • Standard Permasnap 2 with a 20 gauge galvanized cleat has a 20-Year Excel Warranty for wind speeds up to 110 mph.

  • Pre-punched holes and supplied fasteners for proper attachment and fast installation

Permasnap® 2 Plus! with a heavy 16 gauge galvanized cleat has a 25-Year Category 5 Warranty for wind speeds up to 155 mph.

more
screen shot 2012-11-02 at 1.16.54 am.png

Continuous Cleat Coping features a continuous 24ga. anchor cleat for secure attachment.

  • Continuous 24ga. anchor cleat for secure attachment in high winds.

  • Standard clips are 20ga. galvanized steel; Continuous Cleat Plus with 16ga. clip may be used in extreme wind areas for increased uplift protection.

  • Internal metal chair drainage system eliminates caulked joints.

  • True welded radius, matching corners, end caps, and other accessories are factory fabricated.

  • 20-Year Excel Warranty for wind speeds up to 110 mph; Continuous Cleat Plus has a 25-Year Category 5 Warranty for wind speeds up to 155 mph.

  • Pre-punched holes and supplied fasteners for proper attachment and fast installation

more
screen shot 2012-11-02 at 1.20.05 am.png

This classic product features a two-piece design with a snap- on fascia and rigid termination bar to assure wind and water stay out of the roof system. Standard face sizes are 3.75”, 5.25”, 6.75” and 8.25”. Custom sizes available upon request.

  • Clamps membrane against building perimeter like a termination bar.

  • Allows use of high-torque screws without penetrating top surface of membrane.

  • FM Approved for maximum wind rating Class 1-180 with 20 gauge galvanized steel retainer or Class 1-465 with .050” aluminum retainer.

  • Ballasted version available.

  • Tested, Certified, and Warranted in wind conditions up to 155 mph. 25-Year, Category 5 Warranty.

more
screen shot 2012-11-02 at 1.20.24 am.png

Hickman’s Extruded TerminEdgeTM provides the superior performance of formed TerminEdge with the added benefit of a heavy extruded aluminum retainer that comes in four sizes, 3.75”, 5.25”, 6.75” and 8.25”.

  • Clamps roof membrane against building like a termination bar preventing leaks and blow-offs.

  • Extruded retainer in four sizes: TEX-375 for one nailer, TEX-525 for two nailers, TEX-675 for three nailers and TEX-825 for four nailers of coverage.

  • Covered by our Category 5, 25-Year Warranty in wind conditions up to 155 mph.

  • Ballasted version available.

  • Extension cleat engages under the extruded retainer drip allowing for custom face sizes.

  • FM Approved for maximum wind rating Class 1-135.

more
screen shot 2012-11-02 at 1.20.43 am.png

W.P. Hickman’s Extruded TerminEdge for BUR and modified bitumen roofing has a wide base flange that will secure

BUR and modified roofing plies. Standard extruded retainer bases for face sizes 3.75”, 5.25”, 6.75” and 8.25”.

  • Clamps roof membrane against building like a termination bar preventing leaks and blow-offs

  • Extruded retainer available for face sizes 3.75”, 5.25”, 6.75” and 8.25”.

  • UL Classified to meet the ANSI/ SPRI ES-1 Roof Edge Standard.

  • Covered by our Category 5, 25-Year, 155 mph warranty.

more
screen shot 2012-11-02 at 1.21.02 am.png

Designed with a multi-part technology that prevents shrinking, pull-back and thermal seperation of BUR or Mod Bit roofing plies from the roof’s edge, Hickman’s Safeguard® Gravel Stop has been protecting roofs for over 50 years.

  • Safeguard introduced multiple part technology that solved shrinking, pull-back, and thermal separation from roof edges.

  • Standard face sizes are 6.25”, 7.75”, 9.25” and 10.75”. Custom sizes available upon request.

  • FM Approved for maximum wind rating Class 1-225.

  • Extrusions available in 6.25”, 8” and 10” face sizes.

  • Tested, Certified, and Warranted in wind conditions up to 155 mph. 25-Year, Category 5 Warranty.

more
screen shot 2012-11-02 at 1.21.24 am.png

Safeguard® NP Gravel Stop grips the roofing membrane without the need for exposed fasteners. Standard face sizes are 5.5”, 7”, 8.5” `and 10”. Custom sizes available upon request.

  • Non-penetrating version of our original Safeguard has no exposed fasteners.
  • FM Approved for maximum wind rating Class 1-645.
  • Tested, Certified, and Warranted in wind conditions up to 155 mph, 25-Year, Category 5 Warranty.
more